Showing posts with label Accessories. Show all posts
Showing posts with label Accessories. Show all posts

Monday, June 22, 2009

Bookmark and Share

Review: Case-Mate Barely There Case for iPhone 3G

0 comments

The Case-Mate Barely There case for the iPhone 3G, available for $19.95 from the TiPb iPhone Store, is designed to accomplish several things:

  • Protect your iPhone from minor impact and abuse (e.g. bumps and scratches)
  • Do so without adding significant bulk or making it un-pocketable (if that’s how you roll)
  • And to look good while doing it.

How well does it hit these targets, and what if anything could it do better? Find out in our review…

I’m not a huge fan of cases. More often than not, my iPhone goes commando in my pocket. Well, almost. I have a sticker-skin on it to protect from minor scratches since the plastic iPhone 3G backing is so prone to them. I do worry, however, that one day I’ll drop my pride and joy and that same plastic backing will chip or crack on me. Living with that fear in the back of my mind is what drove me to try out a few options, starting with one that’s as close to naked as a hard case can be.

Design

Case-Mate’s Barely There case comes in a rainbow of colors. Enough to make the latest gen iPod nano jealous. Case the rainbow. Seriously. Black, white, red, orange, purple, pink, and blue are your options. Being somewhat stalwart and sedate myself, I went with black.

It covers the back and sides of the iPhone 3G, with cutouts at the corners to increase flexibility and aid in getting it on or off. Cutouts are also provided for the controls, speaker, mic, and dock port, and a hole is cut in the back so the big Apple logo on the iPhone can represent. Fandom rejoice. Everyone else scratch your heads and hope nothing spears it right in that target spot.


For the front, in lieu of armor, Case-Mate provides a fairly typical screen protector.

Usability

Slide your iPhone in, volume buttons first, and the other side flexes and snaps into place securing your iPhone in its protective shell. Simple, direct, easy. Win.

For the screen protector — it’s a screen protector. Clean thoroughly. Apply carefully. Squeegee down deliberately.

day in, day out, the case just does what it’s supposed to from that point on — protect your iPhone from the abuse of casual use. Living up to it’s name, it often times felt like it really was barely there, adding nothing appreciable to the in-pocket experience, and even giving a tiny bit of extra, and appreciated, heft in-hand.

It’s not coated in soft-touch, so there’s really no added security when it comes to actually preventing drops, but it feels tough enough to survive a pretty good whack. And hey, if you break it, at least you’re only out an Andrew Jackson and not the heap of Ben Franklins a new iPhone would cost you.

Of course, the front is covered with only a thin plastic film, so while you still get the scratch protection, dropping it face down will offer nothing in the way of similar impact resistance.

Problems? A couple minor ones to start, mostly to do with fit and finish. The edges in the corners were left a tad sharp. Don’t get me wrong, nothing skin-piercing here, just enough to give you an annoying poke. A little extra rounding off in the factory would have been appreciated.

Likewise — and I preface this by saying I have a sticker-skin on top of my iPhone 3G which might have caused just a millimeter or so of extra girth, creating the problem — plastic interiors make me to worry about cases causing scratches as much as they prevent them. I saw some depressions on my sticker-skin. No idea if that would have translated to anything on a bare iPhone back, but a little more inside finish at the factory would be reassuring here as well.

Being a complete and single unit case, it’s not compatible with all dock-port accessories. Anything slim and at the end of a long cable, like the standard USB sync that comes with the iPhone, should do you fine. Any kind of cradle, however, will almost certainly require you to remove the case first.

Lastly, the added size, even while minimal, will of course make it incompatible with some holsters and pouches. Without a belt-clip option, this case seems pretty much targeted at people like me — those who prefer not to have cases or case-like trappings at all.

Again, just like the product name promises — this case is barely there.

Conclusion

For those who prefer nothing to come between them and our iPhones, the Case-Mate Barely There case is definitely worth a look. In the eternal compromise that comes between comfort and protection, Case-Mate strikes an excellent balance. And, since Apple in its infinitely looped wisdom only offers the iPhone 3G in black and white models, the Case-Mate is also a great way to splash some color on your unit while keeping things lean and still getting some added peace of mind.

Pros

  • Strong and flexible
  • Easy application and excellent fit
  • Wide range of color choices

Cons

  • Edges and inside could have better finish
  • Not compatible with some dock-port accessories
  • Not compatible with all holsters/pouches and no belt-clip option
Read More...
Bookmark and Share

Review: Jawbone PRIME for iPhone

0 comments

jawbone_prime_hero

First there was Jawbone. Then Jawbone 2. Now we have Jawbone PRIME, the latest — and maybe the greatest — noise-assassinating Bluetooth headset ever to pair with an iPhone.

Available for $119.95 from TiPb’s iPhone store, we’ll see if it lives up to its reputation, and its premium price… after the break.

What’s in the Box

jawbone_prime_box_frontjawbone_prime_box_back

Aliph really went all out to make the Jawbone PRIME an experience. Right from the start, the headset is presented to you floated in a clear box with a treasure trove of extras stashed beneath. Like with Apple products, you reveal these extras in layers, first a selection of 5 extra ear pieces for a total of six. You have small, medium, and large both for solo wear and for use with either the regular ear loop or the “premium” leather ear loop. Also included in the second layer is the USB cord (standard USB to proprietary connector — unfortunately no micro-USB on the headset end) as well as an AC adaptor if you want to plug the cord into a wall socket. All in all, a generous and well rounded assortment.

jawbone_prime_box_accessoriesjawbone_prime_box_accessories_02

Design

Jawbone PrimeCompared to the original Jawbone, which was my primary headset for almost a year, Jawbone PRIME is smaller and lighter, if not appreciably thinner. Yes, the uber-sexy exterior still hides a fairly plump little, kidney bean shaped device that cozies up to its namesake — your jawbone. It’s also got a textured outside face, much like the original, though as with the Jawbone 2, it’s gone from overtly cheese grater-like to a more subtle, dimpled look.

For the fashion-conscious, the simple truth is it remains arguably the best looking headset on the market — and comes in a wide variety of colors so you can accessorize to your hearts content (meaning I went with turtle-neck black, of course).

Usability

Pairing? Come on, we’re iPhone users. You turn it on, it pops up on your iPhone Bluetooth Settings panel, you select it, it asks for verification, and — boom! — you’re paired.

Charging is also a snap — literally. You snap the Jawbone PRIME (much as you did previous Jawbones) into the proprietary USB cable and plug the other end into a standard, powered USB port on your PC, laptop, hub, etc. or into the provided AC adaptor. Of course, I wish they’d used micro-USB on the headset end just so cables could be re-used between devices, so if there’s a single knock against Aliph, that’s it.

Wearing the Jawbone PRIME, depending on whether you choose to rock the ear loop is either as simple as placing it in your ear pointing down and twisting up (for without) or just hooking it into place. Easy peasy.

At this point I have to mention, as I do with every headset review, that my ears have been battered to the point that almost nothing fits right in them anymore (a few in-ear designs aside). So, I went with the ear loop and even then, if I’m not careful to readjust, the ear loop alone typically ends up keeping the device in anything resembling proximity to my head. For you non-mutants out there, you’ll likely have no problem at all, especially given the 6 different fitting options that come with the Jawbone PRIME.

Using the Jawbone PRIME to take calls involves pressing the main “button” on the face of the device. I but “button” in “quotes” because Aliph seems to share Apple’s hatred for obvious clicking mechanisms and so the “button” is completely invisible. You press it much as you do an Apple mouse or new-style trackpad — through the entire surface.

There’s nothing hidden about call quality, however. I tried it out walking outside, in the car during rush hour, and in a big-iron server room with multiple machines, drives, and cooling systems whirring.

This button will also, if held down, turn the headset off or on.

Jawbone PRIME’s second button, located at the top of the device just above the charging port, is even more of a multi-tasker. It will cycle through volume (because there’s no separate volume rocker… tsk!), reject calls, etc. (i.e. initiate voice calls on other platforms). If held down, it will also turn of NoiseAssasin, or turn it back on again.

jawbone_prime_back

Technology

Forgive me for quoting from Aliph here, but if you’re interested in more than just does it work (it does!), here’s how:

Acoustic Voice Activity Detector (AVAD) provides a fail-safe mechanism when the Voice Activity Sensor (VAS) doesn’t touch your face. When the VAS is not touching the face, Jawbone PRIME performs as good as or better than any other noise canceling headset. When the VAS touches the face, you get the turbo-boost to the NoiseAssassin performance.

Jawbone PRIME also has a subtle wind feedback mechanism built into the headset that gently alerts you when voice clarity is compromised due to wind gusts so the user can self-correct. While Jawbone PRIME does not completely remove the impact of wind, it does more than any other headset to remove wind and alert the user to the fact that wind may be affecting the conversation.

jawbone_prime_bottom

Conclusion

Jawbone PRIME is the best headset I’ve used to date. Stylish, flexible, and most importantly — highly functional, it builds upon the previous generation of Jawbone’s to raise the bar another notch.

Sure, micro-USB and a volume rocker would be nice, no doubt about it, but those minor discontents can’t take away from the overall package which, if it isn’t best of breed, is certainly a leading contender for the title.

If fit, finish, and performance are more important than a budget price point, Jawbone PRIME just might be the headset for you.

Pros

  • 6 fitting options including 3 for ear-loop use.
  • Stylish yet comfortable
  • Cutting edge noise cancelation technology
  • Premium product

Cons

  • Apple-like lack of overt buttons and standard connectors
  • Premium price
Read More...
 

Copyright 2008 All Rights By Mr.Phu The List Auto , Automobliles